Let's Make a Fun Penguin Coffee Card with VersaMagic Inks

By Imagine on September 26, 2024

By Kathi Rerek

I love coffee and I love penguins. Therefore I have a large collection of penguin and/or coffee themed crafting products. Here's a somewhat snarky card using the wonderful VersaMagic Inks.

Skill Level: Intermediate
Time: 1.5 hours

Instructions:

Step 1:
Use Nocturne VersaFine Clair Ink to stamp the smallest penguin from the Grumpy Penguin Red Rubber Stamp Set onto a panel of Bristol paper.

Steps 2A - 2D:
2A - Smoosh the Cantaloupe Memento Dew Drop Inkpad onto a piece of acetate packaging. Dip a paint brush into water, pick up some ink off of the acetate sheet, and paint both side sides of the penguin's beak.

2B- Repeat the process with Dandelion Memento Ink and paint the center of the penguin's beak, blending the two colors of ink. Clean and dry the acetate sheet.

2C - Smoosh the Tuxedo Black Memento Inkpad onto the acetate sheet. Dip a paintbrush into water, wipe off the excess water, pick up some black ink, and paint the dark parts of the penguin. Repeat the process using more diluted ink to add some greyer tones to the penguin . Clean and dry the acetate sheet.

2D - Smoosh the Angel Pink and Summer Sky Memento Dew Drop Inkpads onto the acetate sheet. Use a damp paintbrush to add some color to the penguin's belly. Heat set.

Step 3:
Fussy-cut the sticker paper version of the stamped penguin and place it over its counterpart on the image panel as a mask.

Step 4:
Use low-tack tape to secure the coffee cup cutting die over the masked panel. Run through a die-cut machine..

Step 5:
Place a Post-It Note horizontally .25" from the bottom of the coffee cup die-cut. Use a Sponge Dauber to apply Moonlight White Brilliance Ink over the Post-It Note onto the coffee cup die-cut. Remove the low—tack tape and the penguin's mask. Heat set.

Step 6A- 6B
Cover the base of the coffee-cut die-cut with low-tack tape. Place the coffee-cup cutting die so that the body of the coffee cup is slightly outside the coffee-cup die-cut. Use a Sponge Dauber to apply Oasis Green VersaMagic Ink fairly heavily along the outside edges of the coffee-cup die-cut (6A).

Remove the cutting die and continue to apply VersaMagic Ink to the rest of the coffee cup (6B).
Heat set.

Step 7:
Use a lavender chalk pencil to add detail and shading to the outside of the coffee-cup die-cut. Use the White Glaze Pen to add highlights to the coffee cup. Sorry that there are no photos.

Step 8:
Use a Sponge Dauber to apply Oasis Green VersaMagic Ink over a piece of Bristol paper to create a background panel. Heat set.

Step 9:
Uselow-tack tape to secure the inked panel to the back of the coffee bean stencil. Use a Sponge Dauber to apply Jumbo Java VersaMagic Ink over the stencil onto the background panel. Remove the panel from the stencil. Heat set the panel.

Step 10:
Use a Sponge Dauber to apply Spring Pansy VersaMagic Ink to two strips of Bristol paper. Heat set.

Step 11:
Use one of the cutting dies from the Majestic Border Die Set to cut the both strips of inked paper.

Step 12:
Repeat Step 10 using Jumbo Java VersaMagic Ink, heat set, then cut with the same cutting die. (No photo)

Step 13:
Use On-Point Glue adhere one of the Spring Pansy inked die-cut atop the Jumbo Java one. (No photo)

Step 14:
Use the scalloped rectangle die from the Passe Partout Rectangle Die set to cut the stenciled background panel from Step 9. Edge the panel with Jumbo Java VersaMagic Ink.

Step 15:
Apply Spring Pansy VersaMagic Ink with a Sponge Dauber to the outer .5" of a panel of Bristol paper. Heat set then cut the panel using the largest plain rectangle from the Passe Partout Rectangle Die set.

Step 16:
Place a leftover scrap of the Spring Pansy VersaMagic inked paper onto the base of a stamping platform. Ink the stamp with Jumbo Java VersaMagic ink, then stamp onto the scrap. Remove the scrap and heat set the ink. Use a Ribbon Slide die to cut the sentiment then edge the die-cut with Jumbo Java VersaMagic Ink.

Step 17:
Use a Ribbon Slide Die to cut the sentiment. Use Jumbo Java VersaMagic Ink to edge the die-cut.

Step 18:
Create an A6 card from a piece of textured white cardstock. Use a sponge dauber to apply Jumbo Java VersaMagic Ink around the edges of the card as shown. Heat set.

Step 19:
Thread the reserved border die from Step 11 through the sentiment die-cut. Use On Point Glue to adhere both the sentiment/border strip die-cut and the stacked die-cut to the background panel as shown.