Let's Make A Crazy Cat Lady Card

Imagine

February 29

By Kathi Rerek

I'm delighted to be returning to the Imagine Crafts AIR program again this year. Our first assignment was to create a project that reflected ourselves. I love creating scenic cards, magical creatures, and cats!

Skill Level: Intermediate
Time: 1.5 hour

Step 1:
Use magnets to secure a 4" x 5.25" piece of white cardstock onto the base of a stamping platform.
Use Nocturne VersaFine Clair ink to stamp the Puss in Boots image twice — once onto the image panel and once onto repositionable sticker paper.

Step 2:
Fussy-cut the sticker paper version and place it onto the image panel as a mask.

Step 3:
Use low-tack tape to secure the rolling hills mask from the Acetate Hills Mask set to the image panel as shown.

Use a sponge dauber to apply Dandelion Memento ink over the mask and masked image onto the image panel. (3A). Use another dauber to apply Angel Pink Memento ink onto the image panel so the pink ink is slightly overlapping and blending with the yellow ink (3B). Repeat this step with Summer Sky Memento ink (3C), then Danube Blue Memento ink (3D).

Step 4:
Spray the image panel with 91% Isopropyl Alcohol to slightly blend the colors and to add some white speckles and splatter.

Step 5:
Trace the rolling hills mask from the Acetate Hills Mask set onto white cardstock, fussy-cut along the trace lines. Label the top and bottom of the mask so you know which is which.
Place the top homemade mask over the sky area of the image panel and secure with low-tack tape.
Use a Fantastix to apply Cottage Ivy Memento ink over the mask onto the image panel (5A).
Place the acetate rolling hills mask below the hilly horizon. Use a Fantastix to apply Cottage Ivy Memento ink over the mask onto the image panel (5B). Continue this process to add additional grassy hills.

Step 6:
Use a sponge dauber and Bamboo Leaves Memento ink to fill in the grassy hills.
Colors the white area of the tail and the wings with Copic markers. Set the image panel aside.

Step 7:
Place a piece of 4.75" x 6.75" Mixed Media cardstock into a box. Spray the panel with Danube Blue Firewords Spray to create a shimmery blue background panel. Heat set.

Step 8:
Use magnets to secure the background panel to the base of a stamping platform so that panel is sideways. Position the long leafy border stamp from Puss in Boots Clear Stamp Set facedown along the edge of the background panel. Press the platform's lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.

Keeping the stamp on the platform's lid, flip the background panel, secure it with magnets, and stamp the border on the other side of the background panel. Heat set.

Step 9:
Reposition the background panel as shown and secure with magnets. Place the small flourish stamp facedown horizontally on the top left of the background panel. Press the platform's lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.

Clean and dry the stamp. Reposition it so that it's facedown on the top left of the panel. Press the platform's lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.

Remove the flourish stamp. Place the paw print stamp so that it's centered and facedown on top of the background panel. Press the platform's lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.

Step 10:
Place the "Crazy Cat Lady" stamp facedown so that it's centered at the bottom of the image panel. Press the platform's lid onto the back of the stamp, lift the lid, ink the stamp with Frost VersaMark ink, and stamp. Repeat.

Step 11:
Sprinkle on Black MBoss Powder, slide the the excess powder back into the bag, and heat set the sentiment.

Step 12:
Use a Sponge Dauber to edge the background panel with Black Shimmer Delicata ink (12A). Heat set.
Trim the image panel to 4.25" x 5.25" and edge with Black Shimmer Delicata ink (12B). Heat set.

Step 13:
Use Tear It! Tape to adhere the image panel to the background panel and the background panel to a 5" x 7" black card.

Crafts Supplies

Imagine:

Other Supplies:

Solar White Classic Crest Cardstock by Neenah Papers
140 lb. Mixed Media Paper by Strathmore
Puss in Boots Clear Photopolymer Stamp Set by Pink Ink Designs
Acetate Hills Mask by Lavinia Stamps
Copic Markers: Y000, Y02, Y21, YR00, R000, R00, RV10, V20, V22, C00, C0, C1, C3, FV2. R93.UR19 B20. YG45
Repositionable Sticker Paper by Avery
Fiskars Curved Craft Scissors
Low-tack Tape
Stamping Platform